Looking for a quiet miter saw for your workshop?. Perfect, you’ve come to the right place. In this guide you can expect to learn the following:
- What a miter saw is
- How does a miter saw work?
- Types of miter saws
- Our top-rated quiet miter saw picks
- How to choose a miter saw
And More…
Whether you are a carpenter, woodworker, or craftsman, I believe you already know the importance of a miter saw in your workshop. With the right miter saw, your cutting possibilities are endless. From cutting door jambs, picture outlines, and window housings to all kinds of angle cuts, a miter saw is a must-have in the workshop.
Besides wood, a Miter Saw can slice through various surfaces, for example, gentle metal and a few kinds of concrete. In the event that you simply utilize the correct sharp edge, this saw can make ideal cuts to a mass of materials.
But just like any saw, a miter saw can also be a source of noise and it can be a disturbance to those around you. Besides that, if you expose yourself to a lot of noise, over time you can lose your hearing.
To ensure your saw is not creating a lot of noise, you will need to pick a quiet miter saw that will generate less noise when in operation. That is why I did deep research and gathered other users’ experiences to compile this list of quiet miter saws that will help minimize the noise in your workshop.
What is a Miter Saw and How Does It Work?
A miter saw is basically a special type of saw that allows you to cut a variety of angles. It features a blade that is attached to a swing arm that pivots left or right to produce angled cuts.
What makes a Miter Saw different from other saws is that it lets make cuts at different angles. A Miter Saw has a blade placed on a swing arm that pivots left or right to produce angled cuts.
Miter saws commonly come in 10″ and 12″ blade size configurations and are commonly made of carbon steel and may come with a coating to make the cut easier.
While the blade sizes are interchangeable with table saws, a miter blade is optimized for short cuts across the grain of the wood with little pull, whereas table saws are optimized for long rip cuts with the grain and pulling the material into the blade.
Also Read:
Our highest rated quietest chainsaws
Types of Miter Saws
There are several types of miter saws available. If you are ready to buy a miter saw, which one will you choose?. With the different types of miter saws available, it’s more than just picking the right brand and features. Here are the different types of miter saws to help you make your choice.
- Miter Saw: Any wood-cutting saw with a mitering table that adjusts the cross-cut angle
- Sliding Miter Saw: Has a rail system that slides the blade from front to back and extends the maximum cutting length
- Compound Miter Saw: Compound miter saws have the added benefit of being able to tilt the blade and head at a variety of angles to the workpiece. This makes bevel cuts possible. A bevel cut is a ramp angled cut into the side of the wood. This type is commonly used in trim work for homes. A compound cut is a combination of a miter and bevel cut.
- Compound Sliding Miter Saw: Sliding miter saws are able to move the saw head back and forth on a sliding rail, similar to a radial arm saw. This increases the size capacity of which a board that can be cut. This type of saw can also allow for the locking of the rails to use for straight, pull-down cuts (like chop saws). With the sliding feature engaged, the user pulls the head forward, turns on the saw, and pushes the blade back into the lumber.
- Dual Compound Sliding Miter Saw: Gives you all three functions with beveling to both left and right. Dual or double compound saws allow the head to rotate when angled on both the left and right-hand sides. This means all angles are achievable without repositioning the workpiece.
Best Quiet Miter Saw Reviews
Below are some of the best miter saws that make less noise. I am by no means saying that these won’t make any noise at all. However, they will operate at a lower noise level than some other brands and models.
1). DEWALT DWS780 12-inch Double Bevel Sliding Compound Miter Saw
The DEWALT 12″ Double Bevel Compound Miter Saw is powered by a 15A 3,600 RPM and offers a new precise miter system and machined base fence support for optimal accuracy.
From delicate woodworking to heavy-duty framing and deck building, this DWS780 provides the accuracy, capacity, and portability that cabinetmakers, trim carpenters, framers, installers, and contractors need.
it is constructed to easy use and has miter capacities of 0 to 60 degrees left, 0 to 50 degree right, bevel 0 to 48 degrees left and right, cross cuts 2 x 14 on 90 degrees, and miters 2 x 10 on 45 degrees, base capacity 6 1/2″ left and right with a crown capacity of 6 5/8″.
The DWS780 miter saw features extremely solid construction and the new XPS cross-cut alignment system that features an improved ultra-bright LED light, which casts a laser-like shadow on the work surface and shows the user precisely where the blade will come in contact with the material.
This is also equipped with a powerful 15-amp motor that delivers 3,800 RPM for high-capacity cutting. Plus it comes with a dust bag, vertical material clamp, wrench, carbide blade, 1-year service, and 3-year limited warranty.
2). Hitachi C12RSH2 12-Inch Dual-Bevel Sliding Compound Miter Saw with Laser Marker
The new Hitachi C12RSH2 sliding dual compound miter saw is equipped with a compact slide system that requires zero rear clearance.
The fixed rail system allows the saw head to smoothly glide along the fixed rails, eliminating the rear clearance that other sliding miter saws require.
It also features Max Cutting Capacities (HxW) 90 Degree Cross Cut 4 to 3/16×12,1/4 inch or 4 11/16×10 3/16 inch. 45 Degree Miter (L/R) 4 3/16×8 5/8 inch or 4 11/16×7 1/16 inch. 45 Degree Bevel (L) 2 3/4×12 1/4 inch or 2 15/16×10 3/16 inch. Compound Cut 45×45 (L/L) 2 3/4×8 5/8 inch or 2 15/16×7 1/16 inch.
Its power 15 Amps motor is designed to be able to tackle tough jobs with ease. This miter saw has a compact design and can be used by both novices and professionals with ease.
3). Makita LS1018 10-Inch Dual Slide Compound Miter Saw
This Makita LS1018 miter saw is also powerful with a 13.0 AMP direct drive motor that delivers 4,300 RPM and requires less maintenance.
It miters 0 degrees to 47 degrees left and 0 degrees to 60 degrees right, with positive stops at 0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, and 45 degrees (left and right).
It also has the capacity to cut 4×4 dimensional lumber in one pass. It’s ideal for fine woodworking, carpentry, general construction, and more.
The package comes with a blade, vise, triangular rule, dust bag, extension wings, and wrench. Max. Cutting Capacity (miter 90 degree) : 3 to 5/8 x 12(inches).
The SKIL 3821-01 12-Inch Quick Mount Compound Miter Saw with Laser comes with a Powerful 15 Amp Motor with 4,500 RPM. This miter saw by SKIL also comes with a Quick-Mount System for quick and easy setup on the SKIL miter saw stand.
Maximum Angles
The maximum angles of the miter saw will also determine the pieces you can cut. A saw generally starts cutting at 90 degrees.
Now the given values for a specific saw’s maximum miter angle are how far in either direction the saw can turn and cut at an angle. The greater a miter saw’s maximum angle, the more versatile the saw is.
The maximum bevel angle determines how far a saw can tilt. Various types of miter saws have different maximum angles.
Miter Table
A miter table allows you to set up long pieces and keep them lying flat without the danger of cracking or falling. Use a safety clamp to keep your piece firmly in place and to avoid any accidents that come from having a piece fly out at you.
Electric Brakes
Electric brakes stop the blade once you let go of the trigger. Electric brakes can reduce this time to as little as two seconds, which can be the difference between a shallow cut and the loss of a finger.
It can take a long time for a blade that was spinning several thousand times per minute to come to a stop, which is a safety risk.
Blades
Without the saw blade, you can’t really cut anything. Having enough blades that you can easily change when you need to do so is important to uninterrupted work. You don’t want to have only one blade that might break and make you work hard.
Larger miter saw sizes accommodate larger blades, which in turn speeds up your work and allows you to cut thicker pieces. Carbide blades are incredibly durable and give accurate cuts.
Make sure to check the manufacturer’s documentation for any warnings against specific blade types. Different types of miter saws may have different spindle types, and these affect how you change out saw blades.
- How to Chew Quietly While Eating-Effective Tips - April 14, 2023
- Why is My Clutch Pedal Squeaking – Causes & Fixes - April 14, 2023
- Propane Tank Making Hissing Noise (Solved) - February 25, 2023