How to Stop Speaker Vibration

You bought top-notch speakers to enable you to enjoy high-quality sounds and give you that home theatre or living room listening experience.

However, it can be very annoying when your high prized speakers vibrate and make dull rattling noises anytime you listen to certain songs.

Some of the simplest ways to stop the vibrations from your speaker are; Replace blown speakers, decouple your speaker from the floor, and add a dampening material inside your speaker.

In this article, we will discuss this in detail and a few methods to help you Troubleshoot the vibration noise issue in your speaker.

Adjust the Settings and Mounting of Your Speakers

One of the first things you need to do when trying to fix the vibrations issue in your speaker is to inspect the audio settings. Even though many sound systems and speakers are made to produce audio at louder levels than speakers used for TV, computers, or similar devices, speakers are more sensitive equipment. The operations of speakers can be affected by unusual and uneven audio configurations.

The best way to remedy this problem is to lower the volume of your speakers by adjusting the base, the balance and the fade settings may help get rid of the vibrations completely. You can inspect them to find out if your speakers are dirty. This is because dust and grit can induce strange noise and vibrations in your speakers. In case you realize your speakers are dirty use a clean soft cloth to clean up the exterior and use a vacuum hose and dust brush to clean the interior.

Also, ensure your speakers are properly fastened to their mounts and stands. You can do this by tightening up loose panels and screws. Place foam on the walls of the mounted speakers to help reduce the vibrations and check out if they are unbalanced and making contact as that may be the reason behind the rattling noise of your speakers.

Also Read:

How to reduce static noise in headphones

Check Out and Fix Car Rattling Speakers

The speakers in your can make vibrating noise due to a few causes. However if you experience the vibrations during the regular operations of your vehicle but not when your car is stationary, then it may be induced by poor road conditions or objects trapped in the compartment of the door where the speakers are located.

If adjusting the audio configuration settings and fastening your speakers mounting firmly didn’t get rid of the vehicle rattle speakers. Then fixing vibrations dampener panels around your car speakers may solve the problem.

Setting up this specially molded foam panel below the hood, the trunk, and the floor of your vehicle will possibly prevent any additional movement or shifting in your vehicle that is causing the speakers to rattle and vibrate. This will also help improve the sound quality in your car.

Replace Blown Speakers

Another reason why your speakers will make vibrating noise is blown, speakers. To find out if the vibrations are caused by blown speakers you need to play a soft song similar to a classical arrangement through your speakers at low volume and draw closer to the speakers themselves and listen to the sound. If you notice popping noise, fuzzy sounds, or static haze then it’s important you further examine your speakers.

Disconnect the power source of your speakers. Take it out from its mounting and gently pull off the cover to unveil the bare speakers. However, a blown speaker usually has a hole in its audio cone. If this is the case the best way to remedy this problem is to replace the speaker.

Decouple Your Speakers from the Floor

One of the first steps to cut down the vibration from your speaker is by decoupling it from the floor. Most quality speakers and speakers stand come with steel spike that you can easily set up. However, if you set up spikes and place a metal disc below every spike will considerably help decrease the speaker vibration from getting to the floor which may otherwise reach the audio component.

Use Shock-Absorbing Materials

Using shock absorber materials will reduce vibrations by taking in some of the vibrations and preventing them from amplifying. Rubber is one of the best materials you can use beneath each foot of your speakers. This will significantly cut down the vibration from impacting.

Add a Dampening Material Inside Your Speaker

Adding a dampening material inside your speaker will help reduce the vibrations. To do this:

Take out the grills that cover your speaker
Measure your speaker’s interior
Cut the Styrofoam into pieces that will match the dimensions of your speaker’s interior. Put the pieces in key places of your speaker such as around the internal speaker cone.
To effectively stop the vibrations you can glue pieces of Styrofoam around the external parts of your speaker.

Use Anti-Vibration Pads

To cut down the vibrations from your speaker you can place anti-vibration pads below your speakers to help eliminate the vibrations. The anti-vibration pads are designed to take in the sound and spread out the vibrations evenly across the pads. This will significantly help reduce the impact of the vibrations.

Why Does My Speaker Vibrate?

Speakers vibrate when the coils inside your speaker moves and tend to shake the speaker’s cone. This causes the speaker to vibrate the air in front of it hence creating sound waves.

Conclusion

Having a noisy Vibrating speaker can be a pain in the neck, but the good news is that these vibrations can be prevented if you do things right. In the above article, we have discussed some of the best methods to help you stop the vibrations in your speakers. Read the article clearly and choose a suitable method to help you solve the speaker vibrations issue.

Author
Recent Posts

Josephine

Josy is a soundproof enthusiast who enjoys quiet and peaceful environments. Here, I share some of the soundproofing tips, quiet products, etc that work for me. Hopefully, they help you too.